Skip to content
Questions? Call ANVIL 406-589-8691 Visualize My Floor Cart is empty

Industrial-grade system. Consumer-grade buying experience.

See your garage finished before you buy the floor.

Upload a photo of your actual garage. Try real ANVIL finishes in your exact space. We work out which system you need and what it costs — before you spend a dollar.

Visualize My Floor Shop Floor Systems
  • Complete systems — nothing else to buy
  • Full broadcast flake
  • Shipped direct
  • Engineered for DIY
  • Technical support included

How it works

Three steps to a floor you have already seen

  1. 01

    Upload your garage

    One photo from your phone. No app, no account, no measuring tape yet.

  2. 02

    Try real ANVIL finishes

    Switch between actual blends in your own space and compare them side by side.

  3. 03

    Build your system

    Tell us your dimensions and we size the kit, including overage. Everything needed ships in one box.

The blends

Two finishes. Twenty-four ways to have them.

Pick the medium first, then the color. Every blend sits on the same primer, the same body coat and the same clear coat — the only thing that changes is what you see.

Flake

Quarter-inch chip, broadcast to refusal. Reads as texture and depth from standing height.

  • Voltage

    Denim blue struck through with white and black. The boldest blend we make.

  • Rawhide

    Warm cream and taupe with black struck through it. Reads light and warm at a distance.

  • Graphite

    Charcoal and mid gray, close to monotone. The darkest and quietest blend we make.

  • Arc Blue

    White and gray lifted by cobalt blue. Brighter and cooler than Voltage.

  • Ironworks

    Soft light grays, low contrast and no black. The most forgiving on an uneven slab.

  • Bone Yard

    Cream, sand and tan. The warmest and lightest blend we make, and the best at hiding dust.

Show 6 more flake blends

  • Quarry

    Cream and warm gray with rust and olive worked through. Reads like crushed stone.

  • Millstone

    Pale cool grays, very low contrast. The quietest light floor we make.

  • Workbench

    Sage-gray and warm beige with black struck through it. Reads like a shop floor that gets used.

  • Glacier

    White and pale blue-gray with slate through it. Cool, soft, brightest under shop lighting.

  • Copperhead

    Cream and taupe with black, lifted by scattered rust. Busier up close than it looks across a garage.

  • Chalkline

    Black and white in equal measure. The sharpest contrast we make.

Crushed quartz

Fine colored aggregate. Reads as a solid color until you are close to it.

  • Mortar

    White and pale sand, peppered with black. The brightest neutral we make.

  • Kiln

    Grayed taupe-brown lifted with off-white. The warmest quartz we make, and still a neutral.

  • Ballast

    Pale gray and white carrying a russet fleck. Reads like weathered stone.

  • Frost

    Pale cool gray, even and quiet. Bright without being stark.

  • Cinder

    Even mid gray with charcoal through it. The workhorse neutral.

  • Basalt

    Charcoal through and through. The darkest floor in the range.

Show 6 more crushed quartz blends

  • Cobalt

    Bright cerulean blue flecked with white. The only saturated color we make.

  • Sparks

    Mid gray shot through with deep red, like heat coming up in steel.

  • Firebrick

    Deep brick red flecked with white. The boldest floor we make.

  • Whitewash

    Pale gray and white. The brightest floor in the range.

  • Limestone

    Soft pale gray flecked with warm pink and a little sage. Neutral enough to sit under anything, and the best in the range at hiding dust.

  • Granite

    Black and white speckle, high contrast. Reads like polished granite.

Compare every blend

Why ANVIL

Five layers, not one coat of paint

A hardware-store garage kit is one thin coat of floor paint. An ANVIL floor is a built system: each layer does a job the layer above it depends on.

That is why it survives hot tires, dropped tools, road salt and a jack stand — and why it can be repaired instead of stripped.

None of these coatings were designed for a garage. They are specified for food and beverage plants, pharmaceutical facilities, semi-conductor plants and loading docks under forklift traffic. We package them for one person over a weekend.

How the system works
  1. Clear protective topcoat Anvil Coat ClearTop Takes the abrasion so the flake never does.
  2. Full broadcast flake Anvil Decorative Flake Broadcast to refusal, then scraped flat. Texture, depth and slip resistance.
  3. Pigmented body coat Anvil Coat-AE The body of the system, and what holds the flake.
  4. Primer Anvil Prime Penetrates the slab and creates the bond everything above relies on.
  5. Prepared concrete Diamond ground to profile. This is the step people skip.

Compare

ANVIL versus a big-box garage kit

Comparison of an ANVIL system against a typical hardware-store garage floor kit
Dimension ANVIL system Typical big-box kit
CoatsPrimer, base, flake, clearOne coat
Flake coverageFull broadcast to refusalScattered accent chips
Surface preparationdiamond grinding to ICRI CSP 3–5Optional etch packet
Hot tire resistanceNo hot tire pickupSoftens and lifts
RepairableYes — spot repair and re-clearStrip and start over
Technical supportReal people who have installed itBox instructions

Sizing

Ordering too little is the expensive mistake

Run out of flake halfway across the slab and you cannot pause — the base coat is already curing, and its window is measured in minutes. Tell us your dimensions and we size the kit with the right overage built in.

Size my floor How to measure

Your garage. Your colors. See it finished.

It takes one photo and about a minute. Nothing to install, no account needed.

Visualize My Floor Order finish samples